A Review on Process Monitoring and Control in Metal-based Additive Manufacturing
Skip Nav Destination
Review Articles
A Review on Procedure Monitoring and Control in Metal-Based Additive Manufacturing
Gustavo Tapia,
Department of Industrial and
Systems Engineering,
Texas A&1000 University
,
College Station, TX 77843
e-mail: gustapia06@tamu.edu
Search for other works by this writer on:
Alaa Elwany
Assistant Professor
Department of Industrial and
Systems Engineering,
Texas A&M University
,
College Station, TX 77843
electronic mail: elwany@tamu.edu
iCorresponding writer.
Search for other works by this author on:
Gustavo Tapia
Department of Industrial and
Systems Engineering,
Texas A&M University
,
College Station, TX 77843
due east-post: gustapia06@tamu.edu
Alaa Elwany
Assistant Professor
Department of Industrial and
Systems Engineering,
Texas A&M Academy
,
College Station, TX 77843
email: elwany@tamu.edu
Contributed by the Manufacturing Technology Sectionalisation of ASME for publication in the JOURNAL OF YardANUFACTURING SouthwardCIENCE AND ENGINEERING. Manuscript received April 12, 2014; concluding manuscript received September iii, 2014; published online Oct 24, 2014. Assoc. Editor: David Fifty. Bourell.
J. Manuf. Sci. Eng. December 2014, 136(6): 060801 (ten pages)
Published Online: October 24, 2014
There is consensus among both the research and industrial communities, and even the general public, that condiment manufacturing (AM) processes capable of processing metallic materials are a set up of game changing technologies that offering unique capabilities with tremendous application potential that cannot be matched by traditional manufacturing technologies. Unfortunately, with all what AM has to offer, the quality and repeatability of metal parts still hamper significantly their widespread as feasible manufacturing processes. This is particularly true in industrial sectors with stringent requirements on part quality such as the aerospace and healthcare sectors. One approach to overcome this challenge that has recently been receiving increasing attention is process monitoring and real-time procedure control to enhance function quality and repeatability. This has been addressed by numerous research efforts in the past decade and continues to be identified equally a loftier priority research goal. In this review paper, we fill up an important gap in the literature represented by the absence of one single source that comprehensively describes what has been achieved and provides insight on what still needs to exist accomplished in the field of process monitoring and control for metal-based AM processes.
References
i.
Wohlers T. T.
2013
,
Wohlers Written report 2013: Additive Manufacturing and 3D Printing Land of the Industry: Annual Worldwide Progress Report
, Wohlers Assembly, Fort Collins, CO.
2.
Gibson I. Rosen D. Due west. Stucker B.
2010
,
Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing
,
Springer
,
Berlin, Germany
.
7.
Zeng K. Pal D. Stucker B.
2012
, "
A Review of Thermal Analysis Methods in Laser Sintering and Selective Laser Melting
,"
Proceedings of the Solid Freeform Fabrication Symposium
, Austin, TX, pp. 796–814.
viii.
Kruth J.-P. Leu M. Nakagawa T.
1998
, "
Progress in Condiment Manufacturing and Rapid Prototyping
,"
CIRP Ann. Manuf. Technol.
,
47
(
two
), pp.
525
–
540
.10.1016/S0007-8506(07)63240-5
nine.
Hopkinson N. Dicknes P.
2003
, "
Analysis of Rapid Manufacturing—Using Layer Manufacturing Processes for Product
,"
Proc. Inst. Mech. Eng., Part C
,
217
(
i
), pp.
31
–
39
.x.1243/095440603762554596
10.
Guo N. Leu M. C.
2013
, "
Additive Manufacturing: Engineering science, Applications and Research Needs
,"
Front. Mech. Eng.
,
8
(
3
), pp.
215
–
243
.ten.1007/s11465-013-0248-viii
11.
Levy G. N.
2010
, "
The Role and Future of the Laser Technology in the Additive Manufacturing Surround
,"
Phys. Procedia
,
5
(
Office A
), pp.
65
–
80
.10.1016/j.phpro.2010.08.123
12.
Boddu M. R. Landers R. G. Liou F. W.
2001
, "
Control of Laser Cladding for Rapid Prototyping—A Review
,"
Proceedings of the Solid Freeform Fabrication Symposium
, pp.
6
–
8
.
13.
DeVor R. Kapoor S. Cao J. Ehmann 1000.
2012
, "
Transforming the Landscape of Manufacturing: Distributed Manufacturing Based on Desktop Manufacturing (DM)2
,"
ASME J. Manuf. Sci. Eng.
,
134
(
4
), p.
041004
.10.1115/1.4006095
fourteen.
Steen Due west. M. Mazumder J.
2010
,
Laser Material Processing
,
Springer
,
Berlin, Federal republic of germany
.
xv.
Yan X. Gu P.
1996
, "
A Review of Rapid Prototyping Technologies and Systems
,"
Comput. Aided Des.
,
28
(
iv
), pp.
307
–
318
.10.1016/0010-4485(95)00035-6
17.
Melchels F. P. Feijen J. Grijpma D. W.
2010
, "
A Review on Stereolithography and Its Applications in Biomedical Engineering
,"
Biomaterials
,
31
(
24
), pp.
6121
–
6130
.x.1016/j.biomaterials.2010.04.050
19.
Liou F. Due west. Choi J. Landers R. Janardhan 5. Balakrishnan Southward. Agarwal S.
2001
, "
Enquiry and Development of a Hybrid Rapid Manufacturing Procedure
,"
Proceedings of the Solid Freeform Fabrication Symposium
, pp.
138
–
145
.
20.
Ghariblu H. Rahmati S.
2014
, "
New Process and Motorcar for Layered Manufacturing of Metal Parts
,"
ASME J. Manuf. Sci. Eng.
,
136
(
4
), p.
041004
.10.1115/1.4026446
21.
Pan Y. Zhou C. Chen Y. Partanen J.
2014
, "
Multitool and Multi-Centrality Computer Numerically Controlled Aggregating for Fabricating Conformal Features on Curved Surfaces
,"
ASME J. Manuf. Sci. Eng.
,
136
(
3
), p.
031007
.10.1115/one.4026898
22.
Michalski L. Eckersdorf K. McGhee J.
1991
,
Temperature Measurement
,
Wiley
,
West Sussex, UK
.
23.
Held G.
2008
, Introduction to Lite Emitting Diode Technology and Applications,
CRC Press
,
Boca Raton, FL
.10.1201/9781420076639
24.
Bi K. Gasser A. Wissenbach Chiliad. Drenker A. Poprawe R.
2006
, "
Identification and Qualification of Temperature Signal for Monitoring and Control in Laser Cladding
,"
Opt. Lasers Eng.
,
44
(
12
), pp.
1348
–
1359
.x.1016/j.optlaseng.2006.01.009
25.
Bi G. Schürmann B. Gasser A. Wissenbach K. Poprawe R.
2007
, "
Development and Qualification of a Novel Laser-Cladding Head With Integrated Sensors
,"
Int. J. Mach. Tools Manuf.
,
47
(
3
), pp.
555
–
561
.x.1016/j.ijmachtools.2006.05.010
27.
Fathi A. Khajepour A. Durali Thousand. Toyserkani E.
2008
, "
Geometry Control of the Deposited Layer in a Nonplanar Light amplification by stimulated emission of radiation Cladding Process Using a Variable Structure Controller
,"
ASME J. Manuf. Sci. Eng.
,
130
(
iii
), p.
031003
.10.1115/ane.2823085
28.
Zeinali M. Khajepour A.
2010
, "
Superlative Command in Light amplification by stimulated emission of radiation Cladding Using Adaptive Sliding Mode Technique: Theory and Experiment
,"
ASME J. Manuf. Sci. Eng.
,
132
(
4
), p.
041016
.x.1115/i.4002023
29.
Salehi D. Brandt M.
2006
, "
Melt Pool Temperature Command Using LabVIEW in Nd:YAG Laser Blown Pulverization Cladding Procedure
,"
Int. J. Adv. Manuf. Technol.
,
29
(
three–4
), pp.
273
–
278
.10.1007/s00170-005-2514-iii
30.
Davis T. A. Shin Y. C.
2011
, "
Vision-Based Clad Height Measurement
,"
Mach. Vision Appl.
,
22
(
1
), pp.
129
–
136
.10.1007/s00138-009-0240-9
31.
Childs P. R.
2001
,
Practical Temperature Measurement
,
Butterworth-Heinemann
,
Oxford, UK
.
37.
Kumar S.
2003
, "
Selective Laser Sintering: A Qualitative and Objective Approach
,"
JOM
,
55
(
10
), pp.
43
–
47
.10.1007/s11837-003-0175-y
38.
Edwards P. O'Conner A. Ramulu M.
2013
, "
Electron Beam Additive Manufacturing of Titanium Components: Properties and Performance
,"
ASME J. Manuf. Sci. Eng.
,
135
(
vi
), p.
061016
.10.1115/one.4025773
39.
Melvin L. South. Das South. Beaman S.
1994
, "
Video Microscopy of Selective Laser Sintering
,"
Proceedings of the Solid Freeform Fabrication Symposium
, DTIC Document, pp.
34
–
41
.
forty.
Gibson I. Ming L. Due west.
1997
, "
Low-Cost Car Vision Monitoring of the SLS Process
,"
Proceedings of the Solid Freeform Fabrication Symposium
, pp.
59
–
66
.
41.
Benda J.
1994
, "
Temperature Controlled Selective Laser Sintering
,"
Proceedings of the Solid Freeform Fabrication Symposium
, Vol.
five
, DTIC Document, pp.
277
–
284
.
42.
Benda J. A. Parasco A.
1995
, "
Method for Performing Temperature-Controlled Laser Sintering
," US Patent No. 5,427,733.
43.
Benda J. A. Parasco A.
1996
, "
Appliance for Multiple Beam Laser Sintering
," US Patent No. five,508,489.
44.
Berumen Due south. Bechmann F. Craeghs T.
2012
, "
Quality Control Arrangement for the Coating Process in Laser- and Pulverisation Bed-Based Additive Manufacturing Technologies
,"
Direct Digital Manufacturing Conference
, Berlin, Germany, Mar. 15–16.
45.
Kleszczynski Due south. zur Jacobsmühlen J. Sehrt J. Witt Thousand.
2012
, "
Error Detection in Laser Beam Melting Systems by High Resolution Imaging
,"
Proceedings of the Solid Freeform Fabrication Symposium
, pp. 975–987.
46.
Kruth J.-P. Mercelis P. Van Vaerenbergh J. Craeghs T.
2007
, "
Feedback Control of Selective Laser Melting
,"
Proceedings of the 3rd International Conference on Advanced Enquiry in Virtual and Rapid Prototyping
, Leiria, Portugal, Sept. 24–29, pp.
521
–
527
.
47.
Kruth J.-P. Duflou J. Mercelis P. Van Vaerenbergh J. Craeghs T. De Keuster J.
2007
, "
On-Line Monitoring and Process Control in Selective Laser Melting and Laser Cut
,"
Proceedings of the 5th Lane Conference
, Laser Assisted Cyberspace Shape Engineering, Vol.
ane
, Erlangen, Germany, Sept. 25–28, pp.
23
–
37
.
48.
Kruth J.-P. Mercelis P.
2009
, "
Process and Apparatus for In-Situ Monitoring and Feedback Control of Selective Light amplification by stimulated emission of radiation Pulverization Processing
," US Patent No. 12/308,032.
49.
De Keuster J. Duflou J. Kruth J.-P. Serruys W.
2011
, "
Arrangement and Method for the On-line Monitoring of the Quality of a Laser Procedure Exerted on a Workpiece
," Usa Patent No. 7,863,544.
50.
Craeghs T. Clijsters S. Yasa E. Bechmann F. Berumen S. Kruth J.-P.
2011
, "
Determination of Geometrical Factors in Layerwise Laser Melting Using Optical Process Monitoring
,"
Opt. Lasers Eng.
,
49
(
12
), pp.
1440
–
1446
.ten.1016/j.optlaseng.2011.06.016
51.
Craeghs T. Bechmann F. Berumen S. Kruth J.-P.
2010
, "
Feedback Control of Layerwise Laser Melting Using Optical Sensors
,"
Phys. Procedia
,
5
(
Role B
), pp.
505
–
514
.10.1016/j.phpro.2010.08.078
52.
Craeghs T. Clijsters S. Yasa East. Kruth J.-P.
2011
, "
Online Quality Command of Selective Laser Melting
,"
Proceedings of the Solid Freeform Fabrication Symposium
, Austin, TX, pp. 212–226.
53.
Craeghs T. Clijsters S. Kruth J.-P. Bechmann F. Ebert M.-C.
2012
, "
Detection of Procedure Failures in Layerwise Light amplification by stimulated emission of radiation Melting With Optical Process Monitoring
,"
Phys. Procedia
,
39
, pp.
753
–
759
.10.1016/j.phpro.2012.10.097
54.
Berumen Southward. Bechmann F. Lindner S. Kruth J.-P. Craeghs T.
2010
, "
Quality Control of Laser- and Powder Bed-Based Additive Manufacturing (AM) Technologies
,"
Phys. Procedia
,
five
(
Part B
), pp.
617
–
622
.10.1016/j.phpro.2010.08.089
55.
Lott P. Schleifenbaum H. Meiners W. Wissenbach K. Hinke C. Bültmann J.
2011
, "
Blueprint of an Optical System for the In Situ Procedure Monitoring of Selective Laser Melting (SLM)
,"
Phys. Procedia
,
12
(
Part A
), pp.
683
–
690
.ten.1016/j.phpro.2011.03.085
56.
Chivel Y. Smurov I.
2007
, "
SLS Process Monitoring and Adaptive Control
,"
Proceedings of the Fourth International WLT—Briefing on Lasers in Manufacturing
, Munich, Germany, June, pp.
553
–
556
.
57.
Chivel Y. Smurov I.
2010
, "
On-Line Temperature Monitoring in Selective Laser Sintering/Melting
,"
Phys. Procedia
,
five
(
Role B
), pp.
515
–
521
.x.1016/j.phpro.2010.08.079
58.
Chivel Y. Smurov I.
2010
, "
Temperature Monitoring in Selective Laser Sintering/Melting
,"
Fundamentals of Light amplification by stimulated emission of radiation Assisted Micro-and Nanotechnologies
, International Society for Optics and Photonics.
59.
Rombouts Chiliad. Kruth J.-P. Froyen L. Mercelis P.
2006
, "
Fundamentals of Selective Laser Melting of Alloyed Steel Powders
,"
CIRP Ann. Manuf. Technol.
,
55
(
1
), pp.
187
–
192
.ten.1016/S0007-8506(07)60395-iii
threescore.
Shishkovsky I. Scherbakov Five. Morozov Y. Kuznetsov G. Parkin I.
2008
, "
Surface Laser Sintering of Exothermic Powder Compositions
,"
J. Therm. Anal. Calorim.
,
91
(
2
), pp.
427
–
436
.ten.1007/s10973-007-8353-8
61.
Bayle F. Doubenskaia Grand.
2008
, "
Selective Light amplification by stimulated emission of radiation Melting Process Monitoring With High Speed Infra-Blood-red Camera and Pyrometer
,"
Fundamentals of Laser Assisted Micro-and Nanotechnologies
, International Society for Optics and Photonics. p.
698505
.
62.
Doubenskaia M. Pavlov One thousand. Chivel Y.
2010
, "
Optical Organisation for On-line Monitoring and Temperature Control in Selective Laser Melting Technology
,"
Key Eng. Mater.
,
437
, pp.
458
–
461
.10.4028/www.scientific.net/KEM.437.458
63.
Kolossov Southward. Boillat E. Glardon R. Fischer P. Locher M.
2004
, "
3D FE Simulation for Temperature Development in the Selective Laser Sintering Process
,"
Int. J. Mach. Tools Manuf.
,
44
(
two
), pp.
117
–
123
.10.1016/j.ijmachtools.2003.10.019
64.
Bai P.-K. Cheng J. Liu B. Wang W.-F.
2006
, "
Numerical Simulation of Temperature Field During Selective Laser Sintering of Polymer-Coated Molybdenum Powder
,"
Trans. Nonferrous Met. Soc. China
,
16
(
Suppl. 2
), pp.
s603
–
s607
.x.1016/S1003-6326(06)60264-1
65.
Bai P.-K. Wang Due west.-F.
2007
, "
Selective Laser Sintering Machinery of Polymer-Coated Molybdenum Powder
,"
Trans. Nonferrous Met. Soc. China
,
17
(
three
), pp.
543
–
547
.10.1016/S1003-6326(07)60130-7
66.
Roberts I. Wang C. Esterlein R. Stanford M. Mynors D.
2009
, "
A Three-Dimensional Finite Element Analysis of the Temperature Field During Light amplification by stimulated emission of radiation Melting of Metal Powders in Additive Layer Manufacturing
,"
Int. J. Mach. Tools Manuf.
,
49
(
12
), pp.
916
–
923
.10.1016/j.ijmachtools.2009.07.004
67.
Gao Y. Xing J. Zhang J. Luo N. Zheng H.
2008
, "
Research on Measurement Method of Selective Laser Sintering (SLS) Transient Temperature
,"
Optik
,
119
(
thirteen
), pp.
618
–
623
.10.1016/j.ijleo.2007.01.010
68.
Childs T. Hauser C. Badrossamay Grand.
2005
, "
Selective Light amplification by stimulated emission of radiation Sintering (Melting) of Stainless and Tool Steel Powders: Experiments and Modeling
,"
Proc. Inst. Mech. Eng., Part B
,
219
(
4
), pp.
339
–
357
.10.1243/095440505X8109
69.
Dinwiddie R. B. Dehoff R. R. Lloyd P. D. Lowe L. E. Ulrich J. B.
2013
, "
Thermographic In-Situ Process Monitoring of the Electron-Beam Melting Technology Used in Additive Manufacturing
," SPIE Defense, Security, and Sensing, International Gild for Optics and Photonics, pp.
87050K-one
–
87050K-ix
.
lxx.
Cost S. Cooper K. Chou K.
2012
, "
Evaluations of Temperature Measurements by Most-Infrared Thermography in Pulverization-Based Electron-Beam Additive Manufacturing
,"
Proceedings of the Solid Freeform Fabrication Symposium
, pp. 761–773.
71.
Price S. Lydon J. Cooper Thou. Chou Thou.
2013
, "
Experimental Temperature Analysis of Powder-Based Electron Axle Additive Manufacturing
,"
Proceedings of the Solid Freeform Fabrication Symposium
, pp. 162–173.
72.
Schwerdtfeger J. Singer R. F. Körner C.
2012
, "
In Situ Flaw Detection by IR-Imaging During Electron Beam Melting
,"
Rapid Prototyping J.
,
xviii
(
iv
), pp.
259
–
263
.10.1108/13552541211231572
73.
Zäh M. F. Lutzmann S.
2010
, "
Modeling and Simulation of Electron Beam Melting
,"
Prod. Eng.
,
4
(
ane
), pp.
15
–
23
.10.1007/s11740-009-0197-6
74.
Scharowsky T. Bauereiß A. Singer R. Körner C.
2012
, "
Observation and Numerical Simulation of Melt Pool Dynamic and Axle Pulverisation Interaction During Selective Electron Beam Melting
,"
Proceedings of the Solid Freeform Fabrication Symposium
, pp. 815–820.
75.
Sammons P. M. Bristow D. A. Landers R. G.
2013
, "
Height Dependent Light amplification by stimulated emission of radiation Metal Deposition Process Modeling
,"
ASME J. Manuf. Sci. Eng.
,
135
(
5
), p.
054501
.10.1115/i.4025061
76.
Jamshidinia G. Kong F. Kovacevic R.
2013
, "
Numerical Modeling of Oestrus Distribution in the Electron Axle Melting of Ti–6Al–4V
,"
ASME J. Manuf. Sci. Eng.
,
135
(
six
), p.
061010
.ten.1115/ane.4025746
77.
Islam M. Purtonen T. Piili H. Salminen A. Nyrhilä O.
2013
, "
Temperature Profile and Imaging Assay of Laser Condiment Manufacturing of Stainless Steel
,"
Phys. Procedia
,
41
, pp.
828
–
835
.x.1016/j.phpro.2013.03.156
78.
Islam One thousand. Taimisto L. Piili H. Salminen A. Nyrhilä O.
2012
, "
Evaluation of Effect of Heat Input in Light amplification by stimulated emission of radiation Assisted Additive Manufacturing of Stainless Steel
,"
Proceedings of the 37th International MATADOR Briefing
, Vol.
10
, pp.
361
–
364
.
79.
Islam M. Taimisto Fifty. Piili H. Salminen A. Nyrhilä O.
2012
, "
Comparison of Theoretical and Applied Studies of Oestrus Input in Laser Assisted Additive Manufacturing of Stainless Steel
,"
Proceedings of the 37th International MATADOR Briefing
, Vol.
ten
, pp.
365
–
368
.
80.
Furumoto T. Alkahari M. R. Ueda T. Aziz M. S. A. Hosokawa A.
2012
, "
Monitoring of Laser Consolidation Procedure of Metal Powder With Loftier Speed Video Camera
,"
Phys. Procedia
,
39
, pp.
760
–
766
.10.1016/j.phpro.2012.10.098
81.
Furumoto T. Ueda T. Alkahari Yard. R. Hosokawa A.
2013
, "
Investigation of Light amplification by stimulated emission of radiation Consolidation Process for Metal Pulverization by Ii-Color Pyrometer and High-Speed Video Camera
,"
CIRP Ann. Manuf. Technol.
,
62
(
i
), pp.
223
–
226
.10.1016/j.cirp.2013.03.032
82.
Dadbakhsh S. Hao 50. Sewell Due north.
2012
, "
Consequence of Selective Laser Melting Layout on the Quality of Stainless Steel Parts
,"
Rapid Prototyping J.
,
18
(
iii
), pp.
241
–
249
.10.1108/13552541211218216
83.
Song Y.-A. Koenig W.
1997
, "
Experimental Study of the Basic Process Mechanism for Direct Selective Laser Sintering of Low-Melting Metallic Powder
,"
CIRP Ann. Manuf. Technol.
,
46
(
1
), pp.
127
–
130
.x.1016/S0007-8506(07)60790-2
84.
Krauss H. Eschey C. Zaeh One thousand.
2012
, "
Thermography for Monitoring the Selective Light amplification by stimulated emission of radiation Melting Process
,"
Proceedings of the Solid Freeform Fabrication Symposium
.
85.
Van Belle 50. Vansteenkiste K. Boyer J. C.
2013
, "
Investigation of Residual Stresses Induced During the Selective Laser Melting Process
,"
Cardinal Eng. Mater.
,
554
, pp.
1828
–
1834
.10.4028/www.scientific.net/KEM.554-557.1828
86.
Taylor C. Childs T.
2001
, "
Thermal Experiments in direct Metal Laser Sintering
,"
Proceedings of Euro RP
.
87.
Fischer P. Locher M. Romano Five. Weber H.-P. Kolossov S. Glardon R.
2004
, "
Temperature Measurements During Selective Light amplification by stimulated emission of radiation Sintering of Titanium Powder
,"
Int. J. Mach. Tools Manuf.
,
44
(
12
), pp.
1293
–
1296
.10.1016/j.ijmachtools.2004.04.019
88.
Fischer P. Romano 5. Weber H.-P. Kolossov S.
2004
, "
Pulsed Light amplification by stimulated emission of radiation Sintering of Metal Powders
,"
Thin Solid Films
,
453
, pp.
139
–
144
.10.1016/j.tsf.2003.11.152
89.
Pavlov M. Doubenskaia M. Smurov I.
2010
, "
Pyrometric Analysis of Thermal Processes in SLM Applied science
,"
Phys. Procedia
,
5
(
Part B
), pp.
523
–
531
.10.1016/j.phpro.2010.08.080
90.
Rodriguez East. Medina F. Espalin D. Terrazas C. Muse D. Henry C. Wicker R.
2012
, "
Integration of a Thermal Imaging Feedback Command System in Electron Beam Melting
,"
Proceedings of the Solid Freeform Fabrication Symposium
.
91.
Mireles J. Terrazas C. Medina F. Wicker R.
2013
, "
Automatic Feedback Control in Electron Beam Melting Using Infrared Thermography
,"
Proceedings of the Solid Freeform Fabrication Symposium
.
92.
Chung M. Allanic A.-L.
2004
, "
Sintering Using Thermal Image Feedback
," US Patent No. 6,815,636.
93.
Chung T. One thousand. Partanen J. P.
2005
, "
Continuous Calibration of a Not-contact Thermal Sensor for Laser Sintering
," U.s.a. Patent No. 6,930,278.
94.
Huskamp C. South.
2009
, "
Methods and Systems for Decision-making and Adjusting Heat Distribution Over a Part Bed
," United states Patent No. vii,515,986.
95.
Beaman J. J. Grube G. W.
1992
, "
Radiant Heating Apparatus for Providing Compatible Surface Temperature Useful in Selective Laser Sintering
," US Patent No. 5,155,321.
96.
Beaman J. J. McGrath J. C. Prioleau F. R.
1994
, "
Thermal Control of Selective Laser Sintering Via Command of the Light amplification by stimulated emission of radiation Scan
," United states of america Patent No. 5,352,405.
97.
Low S. C. Ake B. E.
2004
, "
Thermocouple Control System for Selective Light amplification by stimulated emission of radiation Sintering Function Bed Temperature Command
," US Patent No. 6,822,194.
98.
Bi 1000. Gasser A. Wissenbach K. Drenker A. Poprawe R.
2006
, "
Characterization of the Process Control for the Directly Laser Metallic Powder Deposition
,"
Surf. Coat. Technol.
,
201
(
6
), pp.
2676
–
2683
.10.1016/j.surfcoat.2006.05.006
99.
Bi G. Sun C. Gasser A.
2013
, "
Study on Influential Factors for Process Monitoring and Command in Laser Aided Additive Manufacturing
,"
J. Mater. Procedure. Technol.
,
213
(
3
), pp.
463
–
468
.10.1016/j.jmatprotec.2012.10.006
100.
Hu D. Mei H. Kovacevic R.
2002
, "
Improving Solid Freeform Fabrication by Laser-Based Additive Manufacturing
,"
Proc. Inst. Mech. Eng., Function B
,
216
(
9
), pp.
1253
–
1264
.10.1243/095440502760291808
101.
Hu D. Mei H. Kovacevic R.
2001
, "
Airtight Loop Control of 3D Laser Cladding Based on Infrared Sensing
,"
Proceedings of the Solid Freeform Fabrication Symposium
, pp.
129
–
137
.
102.
Hu D. Kovacevic R.
2003
, "
Modeling and Measuring the Thermal Behaviour of the Molten Pool in Closed-Loop Controlled Light amplification by stimulated emission of radiation-Based Additive Manufacturing
,"
Proc. Inst. Mech. Eng.
, Part B,
217
(
4
), pp.
441
–
452
.x.1243/095440503321628125
103.
Hu D. Kovacevic R.
2003
, "
Sensing, Modeling and Control for Light amplification by stimulated emission of radiation-Based Additive Manufacturing
,"
Int. J. Mach. Tools Manuf.
,
43
(
1
), pp.
51
–
60
.10.1016/S0890-6955(02)00163-3
104.
Jandric Z. Kmecko I. S. Kovacevic R. Valant M. East.
2005
, "
System and Method for Controlling Welding Parameters in Welding-Based Deposition Processes
," Us Patent No. 6,940,037.
105.
Hu D. Kovacevic R. Valant 1000. East.
2006
, "
System and Method for Decision-making the Size of the Molten Pool in Laser-Based Additive Manufacturing
," US Patent No. 6,995,334.
106.
Kovacevic R. Valant Yard. Eastward.
2006
, "
Pulverisation Delivery Organisation and Method
," United states of america Patent No. 7,045,738.
107.
Xing F. Liu W. Zhang 1000. Shang 10. Wang T.
2006
, "
Intelligent Metal Powder Laser Forming Organization
,"
Knowledge Enterprise: Intelligent Strategies in Product Pattern, Manufacturing, and Management
,
Springer
,
Berlin, Germany
, pp.
525
–
535
.
108.
Xing F. Liu W. Wang T.
2006
, "
Real-Fourth dimension Sensing and Command of Metal Pulverization Laser Forming
,"
World Congress on Intelligent Control and Automation WCICA
, Vol.
2
, Dalian, People's republic of china, June 21–23, pp.
6661
–
6665
.
109.
Jiang Due south. Liu W. Xing F.
2006
, "
Research on Measuring and Command System of Metallic Powder Light amplification by stimulated emission of radiation Shaping
,"
Proceedings of the 2006 IEEE International Conference on Mechatronics and Automation
, Luoyang, China, June 25–28, pp.
1717
–
1721
.
110.
Meriaudeau F. Truchetet F. Dumont C. Renier Due east. Bolland P.
1996
, "
Conquering and Image Processing System Able to Optimize Light amplification by stimulated emission of radiation Cladding Procedure
,"
3rd International Conference on Signal Processing
, Vol.
2
, Beijing, Mainland china, October. 14–xviii, pp.
1628
–
1631
.
111.
Meriaudeau F. Truchetet F.
1996
, "
Command and Optimization of the Light amplification by stimulated emission of radiation Cladding Process Using Matrix Cameras and Image Processing
,"
J. Laser Appl.
,
8
(
6
), pp.
317
–
324
.10.2351/1.4745438
112.
Doubenskaia K. Bertrand P. Smurov I.
2004
, "
Optical Monitoring of Nd:YAG Laser Cladding
,"
Thin Solid Films
,
453
, pp.
477
–
485
.ten.1016/j.tsf.2003.eleven.184
113.
Smurov I. Doubenskaia Yard. Grigoriev S. Nazarov A.
2012
, "
Optical Monitoring in Laser Cladding of Ti6Al4V
,"
J. Therm. Spray Technol.
,
21
(
6
), pp.
1357
–
1362
.10.1007/s11666-012-9808-4
114.
Tang 50. Ruan J. Landers R. G. Liou F.
2008
, "
Variable Powder Flow Rate Control in Laser Metal Deposition Processes
,"
ASME J. Manuf. Sci. Eng.
,
130
(
4
), p.
041016
.10.1115/one.2953074
115.
Iravani-Tabrizipour M. Toyserkani E.
2007
, "
An Image-Based Feature Tracking Algorithm for Real-Fourth dimension Measurement of Clad Meridian
,"
Mach. Vision Appl.
,
eighteen
(
6
), pp.
343
–
354
.10.1007/s00138-006-0066-7
116.
Clare A. Oyelola O. Abioye T. Farayibi P.
2012
, "
Laser Cladding of Runway Steel With Co–Cr
,"
Proceedings of the 37th International MATADOR Conference
, Vol.
x
, pp.
349
–
353
.
117.
Valsecchi B. Previtali B. Vedani M. Vimercati M.
2010
, "
Fiber Laser Cladding With High Content of WC-Co Based Pulverization
,"
Int. J. Mater. Grade.
,
3
(
ane
), pp.
1127
–
1130
.x.1007/s12289-010-0970-2
118.
Shah 1000. Pinkerton A. J. Salman A. Li L.
2010
, "
Effects of Melt Puddle Variables and Process Parameters in Light amplification by stimulated emission of radiation Straight Metal Deposition of Aerospace Alloys
,"
Mater. Manuf. Process.
,
25
(
12
), pp.
1372
–
1380
.10.1080/10426914.2010.480999
119.
Doubenskaia M. Pavlov Yard. Grigoriev Southward. Smurov I.
2013
, "
Definition of Effulgence Temperature and Restoration of True Temperature in Laser Cladding Using Infrared Camera
,"
Surf. Coat. Technol.
,
220
, pp.
244
–
247
.10.1016/j.surfcoat.2012.10.044
120.
Nan Fifty. Liu W.
2006
, "
Sensing and Command for Geometry Stability of the Cook Puddle and the Cross Exclusive Surface area in Laser Cladding
,"
First International Conference on Innovative Calculating, Data and Control ICICIC
, Vol.
1
, Beijing, People's republic of china, Aug. 30–Sept. 1, pp.
521
–
524
.
121.
Liu S. Farahmand P. Kovacevic R.
2014
, "
Optical Monitoring of High Power Straight Diode Light amplification by stimulated emission of radiation Cladding
,"
Opt. Laser Technol.
,
64
, pp.
363
–
376
.10.1016/j.optlastec.2014.06.002
122.
Duley Westward. Due west. Kinsman Thou.
1997
, "
Method and Apparatus for Real-Time Control of Laser Processing of Materials
," U.s. Patent No. five,659,479.
123.
Carbone F.
2005
, "
Directed Free energy Net Shape Method and Appliance
," US Patent No. 11/054,770.
124.
Bagavath-Singh V.
2006
, "
Role-Geometry Independent Real Time Closed Loop Weld Puddle Temperature Control Organization for Multi-Layer DMD Process
," US Patent No. 10/525,938.
125.
Hofmeister W. Griffith M.
2001
, "
Solidification in Straight Metallic Degradation past LENS Processing
,"
JOM
,
53
(
nine
), pp.
xxx
–
34
.10.1007/s11837-001-0066-z
126.
Hofmeister W. Knorovsky Chiliad. A. Maccallum D. O.
1999
, "
Video Monitoring and Control of the LENS Process
,"
ninth International Conference of Computer Technology in Welding
, American Welding Society.
127.
Griffith K. Schlienger Thou. Harwell L. Oliver Chiliad. Baldwin Thousand. Ensz Yard. Essien Thousand. Brooks J. Robino C. Smugeresky J. Hofmeister W. Wert K. Nelson D.
1999
, "
Understanding Thermal Behavior in the LENS Procedure
,"
Mater. Des.
,
xx
(
2
), pp.
107
–
113
.10.1016/S0261-3069(99)00016-3
128.
Griffith M. L. Hofmeister W. H. Knorovsky K. A. MacCallum D. O. Schlienger M. Eastward. Smugeresky J. Eastward.
2002
, "
Straight Laser Condiment Fabrication Organisation With Epitome Feedback Control
," US Patent No. 6,459,951.
129.
Bernges J. Kessler B. Schuermann B.
2005
, "
Sensor Device for Detecting Radiation From the Region of a Zone of Interaction Between a Laser Beam and a Workpiece and Device for Monitoring a Laser Machining Operation and Light amplification by stimulated emission of radiation Machining Head
," United states of america Patent No. 11/115,244.
130.
Fehrmann B. Hoebel M.
2009
, "
Method of Controlled Remelting of or Light amplification by stimulated emission of radiation Metal Forming on the Surface of an Article
," US Patent No. 7,586,061.
131.
Zhong M. Liu W. Ning G. Yang Fifty. Chen Y.
2004
, "
Laser Directly Manufacturing of Tungsten Nickel Collimation Component
,"
J. Mater. Process. Technol.
,
147
(
ii
), pp.
167
–
173
.10.1016/j.jmatprotec.2003.12.009
132.
Hua T. Jing C. Xin L. Fengying Z. Weidong H.
2008
, "
Research on Molten Pool Temperature in the Process of Laser Rapid Forming
,"
J. Mater. Process. Technol.
,
198
(
ane
), pp.
454
–
462
.10.1016/j.jmatprotec.2007.06.090
133.
Lin J. Steen West.
1998
, "
An In-procedure Method for the Changed Estimation of the Pulverization Catchment Efficiency During Laser Cladding
,"
Opt. Laser Technol.
,
xxx
(
2
), pp.
77
–
84
.10.1016/S0030-3992(98)00007-3
134.
Zhu Thou. Li D. Zhang A. Pi G. Tang Y.
2011
, "
The Influence of Collision Variations on the Forming Accuracy in Laser Direct Metal Deposition
,"
Rapid Prototyping J.
,
17
(
two
), pp.
98
–
106
.10.1108/13552541111113844
135.
Zhu Yard. Li D. Zhang A. Pi G. Tang Y.
2012
, "
The Influence of Laser and Powder Defocusing Characteristics on the Surface Quality in Light amplification by stimulated emission of radiation Directly Metal Deposition
,"
Opt. Laser Technol.
,
44
(
two
), pp.
349
–
356
.10.1016/j.optlastec.2011.07.013
136.
Leong Chiliad. Ho One thousand. Han H.
2005
, "
Monitoring Light amplification by stimulated emission of radiation Cladding
,"
24th International Congress on Applications of Lasers and Electro-Optics
, ICALEO, pp.
895
–
899
.
137.
Tan H. Chen J. Zhang F. Lin X. Huang Westward.
2010
, "
Estimation of Laser Solid Forming Process Based on Temperature Measurement
,"
Opt. Laser Technol.
,
42
(
1
), pp.
47
–
54
.10.1016/j.optlastec.2009.04.016
138.
Li L. Steen W. M.
1990
, "
In-Process Clad Quality Monitoring Using Optical Method
,"
Proceedings SPIE 1279, Laser-Assisted Processing II
, International Society for Optics and Photonics, pp.
89
–
100
.
139.
Ermurat M. Arslan M. A. Erzincanli F. Uzman I.
2013
, "
Procedure Parameters Investigation of a Laser-Generated Single Clad for Minimum Size Using Design of Experiments
,"
Rapid Prototyping J.
,
xix
(
vi
), pp.
452
–
462
.x.1108/RPJ-06-2011-0062
140.
Lee H.-K.
2008
, "
Effects of the Cladding Parameters on the Degradation Efficiency in Pulsed Nd:YAG Light amplification by stimulated emission of radiation Cladding
,"
J. Mater. Process. Technol.
,
202
(
1
), pp.
321
–
327
.10.1016/j.jmatprotec.2007.09.024
141.
Labudovic Chiliad. Hu D. Kovacevic R.
2003
, "
A 3 Dimensional Model for Direct Laser Metal Powder Degradation and Rapid Prototyping
,"
J. Mater. Sci.
,
38
(
i
), pp.
35
–
49
.10.1023/A:1021153513925
142.
Ye R. Smugeresky J. E. Zheng B. Zhou Y. Lavernia E. J.
2006
, "
Numerical Modeling of the Thermal Behavior During the LENS Process
,"
Mater. Sci. Eng. A
,
428
(
ane
), pp.
47
–
53
.10.1016/j.msea.2006.04.079
143.
Alimardani M. Toyserkani Due east. Huissoon J. P.
2007
, "
Three-Dimensional Numerical Approach for Geometrical Prediction of Multilayer Laser Solid Freeform Fabrication Procedure
,"
J. Laser Appl.
,
19
(
1
).10.2351/one.2402518
144.
Han 50. Phatak G. Liou F.
2004
, "
Modeling of Laser Cladding With Pulverisation Injection
,"
Metall. Mater. Trans. B
,
35
(
6
), pp.
1139
–
1150
.10.1007/s11663-004-0070-0
145.
Tan H. Chen J. Zhang F. Lin Ten. Huang W.
2010
, "
Process Analysis for Laser Solid Forming of Sparse-Wall Structure
,"
Int. J. Mach. Tools Manuf.
,
50
(
1
), pp.
one
–
viii
.10.1016/j.ijmachtools.2009.10.003
146.
Jendrzejewski R. Kreja I. Śliwiński G.
2004
, "
Temperature Distribution in Light amplification by stimulated emission of radiation-Clad Multi-Layers
,"
Mater. Sci. Eng. A
,
379
(
one
), pp.
313
–
320
.10.1016/j.msea.2004.02.053
147.
Wang L. Felicelli S. D. Craig J. Eastward.
2009
, "
Experimental and Numerical Written report of the LENS Rapid Fabrication Process
,"
ASME J. Manuf. Sci. Eng.
,
131
(
4
), p.
041019
.10.1115/i.3173952
148.
Qian L. Mei J. Liang J. Wu 10.
2005
, "
Influence of Position and Laser Power on Thermal History and Microstructure of Straight Laser Made Ti–6Al–4V Samples
,"
Mater. Sci. Technol.
,
21
(
v
), pp.
597
–
605
.10.1179/174328405X21003
149.
Hu Y. Chen C. Mukherjee K.
2000
, "
Measurement of Temperature Distributions During Laser Cladding Process
,"
J. Light amplification by stimulated emission of radiation Appl.
,
12
(
3
), pp.
126
–
130
.ten.2351/one.521921
150.
Kelly J. G.
2002
, "
Direct-Metallic-Degradation (DMD) Nozzle Mistake Detection Using Temperature Measurements
," US Patent No. six,423,926.
151.
Lin J. Steen Westward.
1998
, "
Pattern Characteristics and Evolution of a Nozzle for Coaxial Light amplification by stimulated emission of radiation Cladding
,"
J. Laser Appl.
,
10
(
2
), pp.
55
–
63
.ten.2351/1.521821
152.
Hu 10. D. Kong F. Z. Yao J. H.
2011
, "
Evolution of Monitoring and Control System for Laser Remanufacturing
,"
Appl. Mech. Mater.
,
44
, pp.
81
–
85
.
153.
Jeantette F. P. Keicher D. One thousand. Romero J. A. Schanwald L. P.
2000
, "
Method and System for Producing Complex-Shape Objects
," US Patent No. 6,046,426.
154.
Smurov I. Doubenskaia One thousand. Zaitsev A.
2012
, "
Complex Analysis of Laser Cladding Based on Comprehensive Optical Diagnostics and Numerical Simulation
,"
Phys. Procedia
,
39
, pp.
743
–
752
.10.1016/j.phpro.2012.ten.096
155.
Balu P. Leggett P. Kovacevic R.
2012
, "
Parametric Study on a Coaxial Multi-Fabric Pulverization Catamenia in Laser-Based Powder Deposition Procedure
,"
J. Mater. Process. Technol.
,
212
(
7
), pp.
1598
–
1610
.10.1016/j.jmatprotec.2012.02.020
156.
Tang L. Landers R. K.
2010
, "
Cook Pool Temperature Control for Laser Metal Deposition Processes—Office I: Online Temperature Control
,"
ASME J. Manuf. Sci. Eng.
,
132
(
i
), p.
011010
.x.1115/1.4000882
157.
Tang L. Landers R. G.
2010
, "
Cook Pool Temperature Control for Laser Metal Deposition Processes—Part Ii: Layer-to-Layer Temperature Command
,"
ASME J. Manuf. Sci. Eng.
,
132
(
1
), p.
011011
.10.1115/1.4000883
158.
Boddu M. R. Musti S. Landers R. G. Agarwal Southward. Liou F. W.
2001
, "
Empirical Modeling and Vision Based Control for Laser Aided Metal Degradation Process
,"
Proceedings of the Solid Freeform Fabrication Symposium
, pp.
452
–
459
.
159.
Vocal L. Bagavath-Singh Five. Dutta B. Mazumder J.
2012
, "
Control of Melt Pool Temperature and Deposition Height During Direct Metal Deposition Process
,"
Int. J. Adv. Manuf. Technol.
,
58
(
1–4
), pp.
247
–
256
.10.1007/s00170-011-3395-2
160.
Mazumder J. Schifferer A. Choi J.
1999
, "
Direct Materials Deposition: Designed Macro and Microstructure
,"
Mater. Res. Innovations
,
3
(
iii
), pp.
118
–
131
.10.1007/s100190050137
161.
Mazumder J. Dutta D. Kikuchi Due north. Ghosh A.
2000
, "
Closed Loop Straight Metal Degradation: Art to Part
,"
Opt. Lasers Eng.
,
34
(
4
), pp.
397
–
414
.10.1016/S0143-8166(00)00072-5
162.
Hua Y. Choi J.
2005
, "
Feedback Control Effects on Dimensions and Defects of H13 Tool Steel by Direct Metallic Deposition Process
,"
J. Laser Appl.
,
17
(
2
), pp.
118
–
126
.x.2351/1.1848530
163.
Mazumder J. Skszek T. Kelly J. K. Choi J.
2002
, "
Production of Overhang, Undercut, and Cavity Structures Using Direct Metal Depostion
," U.s. Patent No. vi,410,105.
164.
Kelly J. K. Mazumder J.
2005
, "
Closed-Loop, Rapid Manufacturing of Three-Dimensional Components Using Direct Metal Deposition
," U.s. Patent No. 6,925,346.
165.
Koch J. Mazumder J.
2000
, "
Apparatus and Methods for Monitoring and Decision-making Multi-Layer Light amplification by stimulated emission of radiation Cladding
," United states of america Patent No. 6,122,564.
166.
Mazumder J. Song L.
2008
, "
Real-Time Implementation of Generalized Predictive Algorithm for Direct Metal Deposition (DMD) Process Control
," Us Patent No. 12/130,351.
167.
Toyserkani E. Khajepour A.
2006
, "
A Mechatronics Arroyo to Laser Powder Deposition Procedure
,"
Mechatronics
,
16
(
10
), pp.
631
–
641
.10.1016/j.mechatronics.2006.05.002
168.
Toyserkani E. Khajepour A. Corbin S.
2004
, "
System and Method for Closed-Loop Control of Light amplification by stimulated emission of radiation Cladding by Powder Injection
," Us Patent No. 10/697,552.
169.
Toyserkani East. Khajepour A. Corbin Southward.
2006
, "
Combines Laser Cladding Technique Forth With Automated Direct Feedback Control to Achieve a Proficient Quality Clad in Terms of Dimensional and Metallurgical Characteristics
," The states Patent No. 7,043,330.
170.
Suh J.
2008
, "
Method and System for Real-Time Monitoring and Decision-making Superlative of Deposit by Using Prototype Photographing and Image Processing Engineering science in Laser Cladding and Laser-Aided Direct Metal Manufacturing Process
," Usa Patent No. 10/495,185.
171.
Liu J. Li L.
2004
, "
In-time Motion Adjustment in Laser Cladding Manufacturing Procedure for Improving Dimensional Accurateness and Surface Cease of the Formed Part
,"
Opt. Laser Technol.
,
36
(
half dozen
), pp.
477
–
483
.10.1016/j.optlastec.2003.12.003
172.
Mok S. H. Bi Grand. Folkes J. Pashby I.
2008
, "
Degradation of Ti–6Al–4V Using a High Power Diode Laser and Wire, Office I: Investigation on the Process Characteristics
,"
Surf. Coat. Technol.
,
202
(
16
), pp.
3933
–
3939
.10.1016/j.surfcoat.2008.02.008
173.
Mok S. H. Bi G. Folkes J. Pashby I. Segal J.
2008
, "
Deposition of Ti–6Al–4V Using a Loftier Ability Diode Laser and Wire, Role Two: Investigation on the Mechanical Properties
,"
Surf. Coat. Technol.
,
202
(
nineteen
), pp.
4613
–
4619
.x.1016/j.surfcoat.2008.03.028
174.
Zalameda J. N. Burke Due east. R. Hafley R. A. Taminger K. M. Domack C. S. Brewer A. Martin R. E.
2013
, "
Thermal Imaging for Assessment of Electron-Beam Freeform Fabrication (EBF3) Additive Manufacturing Deposits
,"
SPIE Defense, Security, and Sensing, International Society for Optics and Photonics
.
175.
Medranoa A. Folkes J. Segala J. Pashbya I.
2009
, "
Fibre Laser Metallic Deposition With Wire: Parameters Study and Temperature Monitoring System
,"
Proceedings of SPIE
, Vol.
7131
.
176.
Heralić A. Christiansson A.-Grand. Ottosson M. Lennartson B.
2010
, "
Increased Stability in Light amplification by stimulated emission of radiation Metallic Wire Deposition Through Feedback From Optical Measurements
,"
Opt. Lasers Eng.
,
48
(
4
), pp.
478
–
485
.x.1016/j.optlaseng.2009.08.012
177.
Heralić A. Christiansson A.-K. Lennartson B.
2012
, "
Top Control of Light amplification by stimulated emission of radiation Metal-Wire Deposition Based on Iterative Learning Control and 3D Scanning
,"
Opt. Lasers Eng.
,
l
(
ix
), pp.
1230
–
1241
.ten.1016/j.optlaseng.2012.03.016
178.
Taminger K. M. Hafley R. A. Martin R. Eastward. Hofmeister Westward. H.
2013
, "
Closed-Loop Procedure Control for Electron Beam Freeform Fabrication and Deposition Processes
," US Patent No. 8,452,073.
179.
Stecker S. Wollenhaupt P. Eastward.
2013
, "
Electron Beam Layer Manufacturing Using Scanning Electron Monitored Closed Loop Command
," US Patent No. 8,598,523.
180.
Schick D. Babu S. S. Foster D. R. Dapino 1000. Short M. Lippold J. C.
2011
, "
Transient Thermal Response in Ultrasonic Additive Manufacturing of Aluminum 3003
,"
Rapid Prototyping J.
,
17
(
5
), pp.
369
–
379
.ten.1108/13552541111156496
181.
Kelly G. S. Advani S. G. Gillespie J. W. Bogetti T. A.
2013
, "
A Model to Characterize Audio-visual Softening During Ultrasonic Consolidation
,"
J. Mater. Procedure. Technol.
,
213
(
xi
), pp.
1835
–
1845
.ten.1016/j.jmatprotec.2013.05.008
182.
Kelly G. South. Just M. S. Advani Due south. G. Gillespie J. Westward.
2014
, "
Energy and Bond Strength Development During Ultrasonic Consolidation
,"
J. Mater. Process. Technol.
,
214
(
8
), pp.
1665
–
1672
.ten.1016/j.jmatprotec.2014.03.010
183.
Sriraman 1000. Gonser M. Fujii H. T. Babu S. Bloss Chiliad.
2011
, "
Thermal Transients During Processing of Materials past Very High Power Ultrasonic Additive Manufacturing
,"
J. Mater. Process. Technol.
,
211
(
10
), pp.
1650
–
1657
.10.1016/j.jmatprotec.2011.05.003
184.
Yang Y. Janaki Ram 1000. Stucker B.
2009
, "
Bond Formation and Fiber Embedment During Ultrasonic Consolidation
,"
J. Mater. Procedure. Technol.
,
209
(
x
), pp.
4915
–
4924
.10.1016/j.jmatprotec.2009.01.014
185.
Hong Y. Zhou J. G. Yao D.
2014
, "
Porogen Templating Processes: An Overview
,"
ASME J. Manuf. Sci. Eng.
,
136
(
iii
), p.
031013
.x.1115/1.4026899
You lot exercise non currently have access to this content.
Sign In
Purchase this Content
6,381 Views
345 Citations
Go Email Alerts
Cited By
- Latest
- Most Read
- Virtually Cited
Related Articles
Related Proceedings Papers
Related Capacity
Source: https://asmedigitalcollection.asme.org/manufacturingscience/article/136/6/060801/377521/A-Review-on-Process-Monitoring-and-Control-in
0 Response to "A Review on Process Monitoring and Control in Metal-based Additive Manufacturing"
Enregistrer un commentaire